JUMO 706021 LOGOLINE 500d Line Recorder Operating Manual - Manual (Page 60)

8 Programming
60
8.3.5 Relay limits
For each relay, a separate limit value is pro-
grammed at which it switches on or off.
In addition, it is determined to which record-
er channel the particular relay is assigned
and whether limit monitoring is activated or
not.
The switching differential to the left and right
of the limit can be freely selected, also the
limit comparator function (switch on or off at
overlimit or underlimit lk7, lk8).
concerning lk7 und lk8

This parameter is only visible when
the recorder is fitted with the inter-
face for the external relay module
ER8 (extra Code 259 is required)

Section 8.6.1

Section 10.3
Display Edit Selection/input with keys Enter Continue with
LIMIT
RELAY VALUE
E
VALUE RELAY:1
Input relay number:
1...8
h
,
R E 
2

2 X VALUE RELY:0.000
Input limit for relay.
X = channel number
Y = relay number
h
,
R
l
,
r
S
(deci-
mal place)
E h
forwards
R
backwards