JUMO 706021 LOGOLINE 500d Line Recorder Operating Manual - Manual (Page 54)

8 Programming
54

If a wrong codenumber is entered,
the recorder remains in normal op-
eration. Signal acquisition, process-
ing and recording remain activated.
The parameters can be viewed but
not programmed.

The codenumbers can be altered in
the setup program under
Edit  Codenumber... or on the
instrument ( Section 8.5.12).
Display Edit Selection/input with keys Enter Continue with
E
CODE: 0000
Input codenumber
h
,
R
l
,
r
E 
2
P-LEVEL
h
forwards
R
backwards