JUMO 706021 LOGOLINE 500d Line Recorder Operating Manual - Manual (Page 35)

7 Text printing
35
7.3 Clock time
This is printed cyclically at a configurable
spacing.
The following spacings can be set:
- 4 cm approx.
- 6 cm approx.
- 12 cm approx.
- no time printing
The spacings are independent of the select-
ed chart speed. Clock speed is only printed
at even times and the spacings given above
are only approximate.
Every fourth clock time print is followed
alternately by the current chart speed, the
programmed recorder designation, and the
date.
The date is always printed on the date
change at 00:00 hrs.
For an accurate time reference on the chart
the clock time is preceded by a time refer-
ence mark (“_”).

If the symbol “?” is printed after the
clock time, the time has to be checked
and re-programmed if necessary
( Section 8.3.2).
_00:00 05.11.96
_23:00