JUMO 706021 LOGOLINE 500d Line Recorder Operating Manual - Manual (Page 40)

7 Text printing
40
7.6 Recording start and end
Recording start and end are reported by a
start and end text which can be programmed.
Text printing for start and end can be
switched on and off separately.

Section 8.5.9
Section 8.5.10
Section 10.4

The end text is being printed in the
stop status in which no other text
can be printed; there is therefore no
priority and no trace interrupting/
overwriting for the end text.

The start text should always have
the highest priority to ensure print-
ing at the start of the recording.

Printing the end text is omitted
when the chart sensor recognises
“end of chart”.

Printing the end text is aborted by
pressing the
e
key.
_12:34 06.11.96 Recording stop
_13:20 06.11.96 Recording start