JUMO 706021 LOGOLINE 500d Line Recorder Operating Manual - Manual (Page 128)

12 Appendix
128
12.4 Status messages
The following status messages are indicat-
ed on the matrix display:
Display Description
INITIALISING The recorder is being initialised. Please wait.
STOP The recorder is in the Stop status because key
S
has been pressed.
EXTERNAL STOP The recorder is in the Stop status because external stop has
been activated by closing the appropriate logic input.
SETUP The setup connector has been plugged into the recorder.
The recorder is ready for communication with the PC connected
to it.
PLEASE WAIT! The configuration data are being written to EEPROM.
During this time the recorder does not respond to any inputs.