IDEX Health & Science VS-606V7 Series - Manual (Page 29)

29
Status indicator lamp
Operation Check Points
• Motor rotates smoothly.
• Motor rotates in the correct direction.
• Motor does not have abnormal vibration or noise.
• Acceleration or deceleration is smooth.
• Current matching the load flows.
• Status indicator LED’s and digital operator display are correct.
Operation Steps
Operator
Display
12-LED
Display Status
Indicator LED
1. Turn ON the power supply. 6.00
RUN
ALARM
2. Set parameter n004 to 1. 1
RUN
ALARM
3. Set the following parameters.
n019 : 15.0 (acceleration time)
n020 : 5.0 (deceleration time)
15.0
5.0 RUN
ALARM
4. F/R blinks.
Select Forward or reverse run by pressing or key.
Examine the application.
(Never select REV when reverse run
is prohibited.)
(Forward)
or
(Reverse)
RUN
ALARM
5. Set the reference by pressing or key.
60.00
RUN
ALARM
6. Press 0.00 60.0 RUN
ALARM
7. Press STOP to stop. 60.0 00.0 RUN
ALARM
NOTE
F /R
FOUT
: ON : Blinking :OFF : Blinking (Long Blinking)
PRGM
PRGM
FREF
FOUT
F R E F
RUN