IDEX Health & Science VS-606V7 Series - Manual (Page 19)

19
• Mounting Dimensions
To mount the VS 606 V7, dimensions as shown below are required.
Caution!
1. The above dimensions are common for both open chassis type (IP00, IP20) and
NEMA 1 type.
2. Always remove both top and bottom covers when using 200/400V, 5.5/7.5Kw
(7.5/10 HP) as open chassis type.
Voltage
Max. Applicable
Motor Output
HP (Kw)
Length of A
200V Single - phase
3 - phase
400V 3 - phase Less than
5 HP (3.7 Kw)
More than
1.18in (30mm)
200V 3 - phase
400V 3 - phase
7.5 HP (5.5 Kw) More than
1.97in (50mm)
10 HP (7.5 Kw)
A
a a