IDEX Health & Science VS-606V7 Series - Manual (Page 123)

123
The software No. (of the inverter whose parameters stored in the digital operator are
read out) is displayed.
[Example] Display the software No. of the inverter whose parameters stored in
EEPROM inside the digital operator.
* Displays Lower 4 digits of the software version.
Software No. Display
Explanation Operator display
• Enable the setting of the
parameters n001 to n179.
• Execute Software No. Display
(Sno)* by Parameter copy
function selection (n176)
• Press DSPL to light [PRGM].
• Press ENTER to display the set
value.
• Change the set value to 4 by
pressing or key.
• Press ENTER.
• Change the parameter No. to
n176 by pressing or key.
• Press ENTER to display the set
value.
• Change the set value to Sno by
pressing or key.
• Press ENTER
• Press DSPL or ENTER
(Can be a different parameter No.)
(
Lit )
(Can be a different set value.)
(Blinks)
(Lit for one second.)
(The parameter is
displayed)
(Lit)
(Lit)
(software version: VSP010013)
(The parameter No. is
displayed)