HID FARGO HDPii User Guide - Manual (Page 88)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
88
not a valid password. password.
To cancel, press the Cancel Print
button.
Print Film Out The Print Film installed in
the Printer is empty. Install new Film and press the
Resume
button to continue
printing.
To cancel the print, press the
Cancel Print
button or the Cancel
button located on the Printer.
Print Film is not
Installed No Print Film is installed in
the Printer. Install the Film and press
Resume
.
To cancel the print, press the
Cancel Print
button or the Cancel
button located on the Printer.
Print Film Sensor
Error The Printer cannot find
the next panel on the Print
Film. Check that the Print Film is
installed properly and press
Resume
.
To cancel the print, press the
Cancel Print
button or the Cancel
button located on the Printer.
Wrong Print Film
Installed An incorrect Print Film has
been installed, or a driver
setting is incorrect. Ensure that the appropriate Print
Film is installed and press the
Resume
button located on the
Printer to continue printing.
To cancel, press the Cancel Print
button or the Cancel button
located on the Printer.
Invalid Print Film
Installed The Print Film installed
does not match the
SecureMark configuration
of the Printer. A non-SecureMark Film is
installed in a SecureMark Printer.
Replace with the appropriate
SecureMark Film and press the
Resume
button on the Printer to
continue printing.
To cancel, press the Cancel Print
button or the Cancel button on the
Printer.
Print Film Error The Print Film caused a
general error. Ensure that the appropriate Print
Film is installed and press the
Resume
button located on the
Printer to continue printing.
To cancel, press the Cancel Print