beautypg.com

HID FARGO HDPii User Guide User Manual

Page 40

background image

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4

40

Removing the Output Side Upgrade Cover (if applicable)

Tools needed:

Press the Release tab with a flat blade. Use the Snap and Clip process.

Estimated Repair Time:

1 minute

Important:

This procedure only applies if the Printer comes equipped with the Output Side

Upgrade Cover (D910139-XX).

Step Procedure

1

Caution: Power off the Printer by unplugging the power cord from

the Printer.

2

Press the release tab in back while simultaneously pulling at the center of the
bottom edge.

3

Reverse instructions to re-assemble. Leave it off if your Printer is upgraded for
the Output.

See also other documents in the category HID Equipment: