HID FARGO HDPii User Guide - Manual (Page 251)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
251
• Languages (available in drop down list) are the languages available in the language set
(currently resident in the Firmware).
Selecting the Calibrate Film tab
The two buttons for the Calibrate Film tab are described below.
• Calibrate button: Sends calibrate film command to Printer. Follow the instruction on the
page for setting up the Printer.
• Help button: Launches help specific to this tab.
Step Procedure
1 Select the Calibrate Film tab.
a. Ensure that the Film Cartridge is installed.
b. Ensure the Printer’s Cover is closed.
c. Click on the Calibrate button. (Note: The Printer’s LCD will display
CALIBRATE PASSED.)
d. Click on the OK button on the LCD display to complete the procedure.