HID FARGO HDPii User Guide - Manual (Page 182)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
182
Step Procedure
1 Select this option to automatically print full-color on the front of a card and
resin black on the back of a card (using YMCKK Print Ribbons).
• If using the YMCKK Ribbon, the front of the card is printed with the
YMCK panels and the back is printed with the second K panel.
(Note #1: This option is automatically enabled when the YMCKK Ribbon
type is selected.)
(Note #2: This option is not available if using the YMCKH Ribbon.)
Using the Print Both Sides - Print Back Image on Front of Card
option
This option becomes active when Print Both Sides is checked. The Default is active and
unchecked.
Step Procedure
1 Select this option:
•
If you need to print the first page of a two-page document on the
backside of the card.
OR
• If you need to print the resin black on the chip-side of the Smartcard.
The second page of the document will be printed on the front side of the
card.