HID FARGO HDPii User Guide - Manual (Page 291)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
291
Section 12: Packing the Card Printer
The purpose of this section is to provide the User with a specific packing procedure for the
HDPii.
Follow this instruction to pack the Card Printer for transport.
Step Procedure
1 Clean the inside of the Printer with deionized air. Wipe it down with a lint-free
cloth.
2 Clean the Printhead with a Printhead swab.
3 Pack the Printer in the original carton and packing materials.
4 Be sure to enclose any necessary paperwork, test cards, etc.
Section 13: Firmware Updates
The purpose of this section is to provide the User with information on the internal software or
Firmware, which controls all aspects of the Printer's operation. New Firmware versions may
be released containing enhancements, such as improved reliability, added features or better
print quality. New Firmware updates can be downloaded from the Internet.
• Refer
to the Fargo Workbench Printer Utility User Guide to download and install
Firmware updates. See the Fargo website to access this document.
• Important: This is a new Printer. Once new Firmware is released and made available
(via Step 2 below), Steps 3 through 14 in this procedure will be enlarged with “real world”
populated windows and dialogs. Until that time, please review this procedure only for
future use.
Upgrading the Main Firmware with the Fargo
Workbench Printer Utility
The Main Printer Firmware upgrades are done with the same procedure as the USB-
connected Printer.
• The PC doing the upgrade must have a Driver installed for the Fargo Printer to be
upgraded.
• Alternatively, a HDPii User can upgrade the HDPii Main Printer Firmware by using the
HDPii Upgrade web page.