HID FARGO HDPii User Guide - Manual (Page 81)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
81
jammed in the Printer. and remove the Print Ribbon
and Film Cartridges.
b. Clear any cards in the Printer
by using the Forward and/or
Back
buttons located on the
Printer’s LCD display.
c. Re-insert the Ribbon and close
the Printer’s Front Cover.
d. Press the Resume button
located on the Printer's LCD
display to continue printing.
e. To Cancel the print, press the
Cancel Print button from the
Driver's display dialog and the
Cancel
button located on the
Printer's LCD display.
Card Jam (Encoder) A Card has become
jammed in the Printer's
Encoding station. a. Open the Printer's Front Cover
and remove the Print Ribbon.
b. Open the Printer's Flipping
Module Cover.
c. Clear any cards in the
Encoding Module by using the
Forward
and/or Back buttons
located on the Printer's LCD
display.
d. Re-insert the Print Ribbon and
close the Printer's Front
Cover.
e. Press the Resume button
located on the Printer's LCD
display to continue printing.
f. To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the
Cancel
button located on the
Printer's LCD display.
Card Jam (Output) A Card has become
jammed in the Printer's
Flipper Table. a. Open the Printer’s Front Cover
and the Output Module Cover.
b. Clear any cards in the Flipper
Table by using the Forward
and/or Back buttons located
on the Printer's LCD display.
c. Close the Printer's Front