HID FARGO HDPii User Guide - Manual (Page 254)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
254
Step Procedure
1 Click the Clean Printer tab. See below.
a. Remove the Card and Film Cartridges and close the covers.
b. Remove the paper back from both sides of the Cleaning Card. (Note:
DO NOT remove the left liner if a Magnetic Encoding Module is installed
in your Printer.)
c. Insert the Cleaning Card into the Card Hopper’s Infeed Rollers.
d. Click on the Clean button below.
e. Guide the Cleaning Card into the Printer if necessary.
f. When the Cleaning routine is complete, the Cleaning Card will exit the
Printer.
g. Reinstall the Card and Film Cartridges.
The Cleaning routine will begin after all current print jobs have completed.