HID FARGO HDPii User Guide - Manual (Page 150)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
150
2 Select Next on the LCD to view the Save Addresses menu entry.
3 Press the Select button to save the current network settings (IP address, GW,
SN Mask) as the stored settings which will be used when automatic address
assignment using DHCP is disabled.
Resetting Passwords
Step Procedure
1 See the Accessing the Network Setup Menu procedure (above) to access
the Network Settings menu:
Options -> MENU -> Next -> Network Settings
2 Select Next on the LCD to view the Reset Passwords menu entry.
3 Press the Select button to reset the User passwords to the default settings of
empty strings.
(Note: This can be used when the passwords are not known.)
Accessing the HDPii IP Address
Follow this procedure:
Step Process
1 Press Info in Display A (below) to continue with the procedure.
2 Press Next several times to access Display C (IP:).
3 Press Next one more time, and the IP: address LCD screen will appear. See
Display D as an example.
4 Your IP address is identified in the final LCD screen. You have completed the
procedure.
Display A – Printer Ready (first
step)
Display B – HDPii (second step)