HID FARGO HDPii User Guide - Manual (Page 19)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
19
Technical Specifications
Term Description
Accepted Card
Thickness • Print only: .030" (30 mil) to .050" (50 mil) / .762mm to 1.27mm
Accepted
Electronic Card
types HID Proximity Cards, Mifare Contactless Smart Cards and Contact
Smart Cards, iClass
Accepted Card
Types
(Compositions) ABS, PVC, PET, PETG, Proximity Cards, Contact Smart Cards,
Magnetic Stripe cards and Optical Memory Cards
Card Cleaning Replaceable cleaning roller (included with each print Ribbon)
Colors Up to 16.7 million colors and 256 shades per Pixel.
Input Card
Cartridge
Capacity 100 cards (.030in./.762mm)
Has refillable Card Cartridge that can either be attached to the
Printer or detached for storage. This allows single feed with the
Card Cartridge removed or with no other cards in the Card
Cartridge
Output Hopper
Card Capacity 100 card Output Hopper capacity (.030" / .762mm)
Includes Reject Hopper capability when connected to the Output
Module with available storage on the Output Tray.
Card Sizes
(Accepted
Standard sizes) HDPii (See Card tab under Printer Adjustments):
• CR-80: This selection is the default form size for the HDPii.
This will print a 2.125 in. W x 3.370 in. L (54mm W x 85.6mm L)
image including a .04 over-bleed on each of the 4 sides.
• CR-80 (default values): Card Size supported is 2.204 in. W X
3.452 in. L (56mm W X 87.7 mm L).
Standard Card Size in inches (HDPii Printer Driver > Card tab)