HID FARGO HDPii User Guide - Manual (Page 87)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
87
Invalid Ribbon The Ribbon installed does
not match the SecureMark
configuration of the
Printer. Install a Certified Print Ribbon and
press the Resume button located
on the Printer's LCD display to
continue printing.
To cancel the print, press the
Cancel Print
button from the
Driver's display dialog and the
Cancel
button located on the
Printer's LCD display.
Invalid Ribbon An incorrect Print Ribbon
has been installed in the
Printer. Check that the Ribbon is correct
for the Printer and retry.
To cancel, click on Cancel Print.
Ribbon Error The Print Ribbon caused
a general error. Press the Resume button located
on Printer to continue.
To cancel, press the Cancel Print
button or the Cancel button
located on the Printer.
No Magnetic
Encoder Installed A print job with Magnetic
encoding was sent with no
Magnetic encoder
installed in the Printer. Ensure that no encoding data is
being sent with the print job and
reprint the card.
Mag Verify Error The Printer is unable to
verify encoded data. Check the Cards and click on
Cancel Print
.
No Mag Strip
Present The Printer is unable to
find a Magnetic stripe on
the card. Check the Cards and click on
Cancel Print
.
No Smart Card
Encoder No Smart Card Encoder is
installed in the Printer. To cancel, click on Cancel Print.
No Prox Card
Encoder No Proximity Card
Encoder is installed in the
Printer. To cancel, click on Cancel Print.
Headlift Error The Headlift Sensor is not
detecting movement from
the Headlift Cam. Reboot the Printer by cycling
power.
To cancel, press the Cancel Print
button.
Invalid Password The Password entered is Press OK to enter another