HID FARGO HDPii User Guide - Manual (Page 185)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
185
Step Procedure
1 Select the Rotate Front 180 Degrees option to rotate the image on the front
of the card by 180 degrees when printed. (Note: The default is unchecked.)
OR
Select the Rotate Back 180 Degrees option to rotate the image on the back
of the card by 180 degrees when printed. (Note: The default is unchecked.
This option is grayed out if no Output is automatically found or if Dual sided is
manually turned off.)
Using the Disable Printing option
Use this option to disable the printing capabilities of the Printer while still allowing the Printer
to encode cards. (Note: This option is useful to encode or re-encode preprinted cards
without wasting additional time or printing supplies. This option allows encoding without
printing.)
Step Procedure
1 Select this option to ensure no print data will be sent to the Printer (while all
encoding instructions will be sent according to how they are configured within
the software). (Note: The default is unchecked.)