HID FARGO HDPii User Guide - Manual (Page 22)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
22
HDP Film
Storage
Temperature 77ºF (25ºC) or lower for no longer than 1.5 years.
Humidity 20% to 80% (non-condensing)
Input Hopper
Card Capacity 100 cards (.030/.762mm)
Interface • USB 2.0 (high speed)
• Ethernet with the internal Print Server
Maximum
Accepted Card
Width 2.125W / 54mmW
Maximum
Accepted Card
Length 3.375L / 85.6mmL
Mechanical
Security Locking override:
The locking solenoid has a mechanical lock override (that allows
access to the secured areas of the Printer with the appropriate key).
This lock has a barrel-type key.
Restricted access:
With the cover closed and locked the user will not have access to
the following areas of the printer:
• Reject
Hopper
• Flipper Access Door
• Ribbon/Film Cartridge access area
• Card Input Hopper
Memory 16MB RAM
Operating
Temperature 65º F to 90º F (18º C to 32º C).
Options • Magnetic stripe encoding dual-sided (simultaneous)
• Smart card encoding (contact/contactless)
• Printer cleaning kit
Output Hopper
Card Capacity 100 cards (.030mm)
Physical Security The Printer has base-plate tie down points for physical security