Using the add and delete buttons, Selecting the full card – HID FARGO HDPii User Guide User Manual

Page 225

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4

225

Using the Add and Delete buttons

Step Procedure

Use the Add button for these capabilities:

•

Add an area default sized to .2 (at location “0” with focus on the added
area).

•

Add multiple areas in the same location with the same affect (as if there
were only one area). (Note: Intersecting/overlapping areas do not
cancel each other out; instead, they act as one area.)

Using the Delete button to delete the area with focus from the graphic.

Selecting the Full Card

Step Procedure

Select the Full Card option to print the resin black (K) panel for all black
found within all areas of the image, as shown below.
• The Card image becomes fully black.
• The resin prints anywhere for black.
• The Add and Delete buttons become inactive and are grayed out.
• The Defined Area object size and location scroll controls become inactive

and are grayed out.

• The inches and mm dials become inactive and are grayed out.