HID FARGO HDPii User Guide - Manual (Page 249)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
249
Using the Configuration Tab
Using the Optional Printer Features Group Box
The Default setting is checked.
• If checked, upon Configuration tab activation, the Driver retrieves the installed Printer
features information from the Firmware and automatically checks the appropriate check
boxes for Dual Sided and Magnetic Encoder.
• If checked, the Dual Sided and Magnetic Encoder checkboxes are read only.
• If checked and no Printer is found or bi-directional capabilities are disabled or unavailable,
the error message (shown below) is displayed.
• If unchecked or cleared, feature check boxes become active and can be manually set.
• If the Driver is reinstalled, it resets to the default of checked.
Using the Event Monitoring Group Box
This Event Monitoring group box displays the Low Supplies (Ribbon and Film).
• The default setting is checked. If checked, the Ribbon Low message box is displayed
with every print job when Printer reports low Ribbon to the driver.