HID FARGO HDPii User Guide - Manual (Page 24)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
24
from the time a card feeds into the Printer until the time it ejects
from the Printer.
*Print speeds do not include encoding time or the time needed for
the PC to process the image.
**Process time is dependent on the size of the file, the CPU,
amount of RAM and the amount of available resources at the time
of the print.
Resolution 300 dpi (11.8 dots/mm)
Single Wire USB
2.0 Encoding
Options • ISO Magnetic Stripe Encoding, dual high- and low-coercivity,
Tracks 1, 2 and 3
• Contactless Smart Card Encoder (HID iClass and MIFARE)
• Contact Smart Card Encoder reads from and writes to all
ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0,
T=1) as well as synchronous cards
• Prox Card Reader (HID read-only)
Software Drivers Windows 7 (32 & 64 bit), Windows XP, Server 2003 , Server 2008
R2 (32 & 64 bit), Vista 32 & 64 bit
Supply
Frequency 50 Hz / 60 Hz
Supply Voltage 100-240 VAC, 3.8A (HDPii )
Supported
Printers/Models HDPii:
• Ethernet
• USB
System
Requirements • x86 based PC or compatible
•
Windows 7 (32 & 64 bit), Windows XP, Server 2003 , Server
2008 R2 (32 & 64 bit), Vista 32 & 64 bit
• 500MHz computer with 256MB of RAM or higher
• 500MB free hard disk space or higher
Warranty Printer: Two year; optional Extended Warranty Program (U.S.
only); see below for more detail.
•
Two (2) Year Factory Warranty
• Covers parts and depot repair
• Extended Warranties available
Printhead: Lifetime; unlimited pass with Fargo-certified Cards