HID FARGO HDPii User Guide - Manual (Page 83)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
83
Card Eject Error The Printer is unable to
eject a card. Please check Printer for a card
jam or other obstruction and press
the Resume button located on the
Printer's LCD display to continue
printing.
To cancel the print, press the
Cancel Print
button from the
Driver's display dialog or the
Cancel
button located on the
Printer's LCD display.
Flipper Jam The Flipper Table has
jammed while either
aligning itself or flipping a
card. a. Open the Printer's Output
Module Cover.
b. Clear any cards in the Output
Module by using the Forward
and/or Back buttons located
on the Printer’s Front Cover.
c. Ensure that the Flipper Table
can rotate freely. Close the
Output Module Cover.
d. Press the Resume button on
the Printer’s Front Cover to
continue printing.
a. To cancel the print, press the
Cancel Print button from the
Driver's display dialog.
No Flipper The Printer does not have
flipping capabilities. a. Verify the Printer has flipper
capabilities via the LCD Menu.
b. If Output capabilities are
present, ensure that the Print
Both Sides
option in the driver
is set correctly.
c. Press the Resume button on
the Printer’s Front Cover to
continue printing.
d. To cancel the print, press the
Cancel Print button from the
Driver’s display dialog or press
the Cancel button located on
the Printer's LCD display.
Ribbon RFID Error The Ribbon tag
information is corrupted or
incorrect. Check that the Ribbon is installed
properly. Cancel is the only
option.
Press the Cancel Print button