HID FARGO HDPii User Guide - Manual (Page 199)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
199
as they travel through the Printer (regardless of image orientation).
• The Card Illustration (shown in the Image Position box) will flip and rotate
according to the selection of Portrait, Landscape or Rotate 180 Degrees.
• The outline around the illustration will always remain in the same
Landscape orientation.
The display (below) represents how the printed image will move in relation to the fixed card
position as positive and negative image placement values are entered.
Step Procedure
2 Follow these instructions:
• Use
the Vertical adjustment to move the image toward the front of the
Printer if a positive number is entered and toward the rear of the Printer if
a negative number is entered.
OR
• Use the Horizontal adjustment to move the image toward the card output
side of the Printer if a positive number is entered and toward the card
input side of the Printer if a negative number is entered.
(Note: The maximum value for the Vertical and Horizontal adjustments is
±100 Pixels (10 Pixels = 0.03 (.8mm).)