Allied Telesis AT-8202 - Manual (Page 9)

1-1
Chapter 1
ATM Network Configuration
This chapter :
❑ Lists the key ATM features of the FORMULA 8200
❑ Shows how to configure the ATM port
❑ Shows how to set parameters for specific ATM functions you
want to run (LEC, CIP, PTOP, or trunking)
The commands used in this section are also described in Chapter 2,
ATM Commands .
Features
The ATM uplink card supports the following ATM key functions:
❑ Switched virtual circuit (SVC) and permanent virtual circuit
(PVC) connections, including trunking
❑ ATM Forum’s LAN Emulation Client (LEC) standard
❑ RFC 1577 Classical IP (CIP) and ARP over ATM
❑ ATM Forum’s User Network Interface (UNI) 3.0 and 3.1
signaling standard
❑ ATM Forum’s Interim Local Management Interface (ILMI) 1.0