Allied Telesis AT-8202 - Manual (Page 70)

ATM/STATS Commands
2-42
.
/ATM/STATS > SIG
Statistics Report for SSCOP
VPI/VCI : 0/5
Switch : 0
Total Rx PDUs : 3011
Discarded SDUs : 0
Rx Error PDUs : 0
Rx Discarded PDUs : 0
Total Tx PDUs : 3011
Tx Error PDUs : 0
Tx Discarded PDUs : 0
Rx InUse Buffer Count : 0
Rx Buffer In Use Gauge : 0
Tx InUse Buffer Count : 0
Tx Buffer In Use Gauge : 0
Table 2-23 ATM/STATS/SIG Parameters
Parameter Description
VPI/VCI Virtual path identifier/virtual connection identifier value of the connection
over which the signaling messages are exchanged
Switch The user network interface (UNI) version number. Current possible values
are UNI 3.0 and UNI 3.1
Total Rx PDUs Total number of packet data units received
Discarded SDUs Total number of outgoing SDUs discarded
Rx Error PDUs Total number of incoming packet data units that have reception errors
Rx Discarded PDUs Total number of incomingpacket data units discarded
Total Tx PDUs Total number of packet data units transmitted
Tx Error PDUs Total number of outgoing packet data units with transmission errors
Tx Discarded PDUs Total number of outgoing packet data units discarded
Rx InUse Buffer Count Receive buffer in-use counter
Rx Buffer In Use Gauge Receive buffer in-use gauge
Tx InUse Buffer Count Transmit buffer in-use counter
Tx Buffer In Use Gauge Transmit buffer in-use gauge