Allied Telesis AT-8202 - Manual (Page 62)

ATM/STATS Commands
2-34
ATM/STATS Commands
Syntax and (alias)
ATM/STATS/AAL5 (aal5st)
ATM/SHOW/ATM (atmst)
ATM/STATS/CIP (cipst)
ATM/STATS/CONNECTION (connst)
ATM/STATS/LEC (lecst)
ATM/STATS/PTOP (ptopst)
ATM/STATS/SIG (sigst)
ATM/STATS/TRUNK (trunkst)
ATM/STATS/UME (umest
Description
The ATM/STATS commands allow you to display various ATM
statistics. See the command examples for a brief description of each
use of the
ATM/STATS command.
ATM/STATS/AAL5 Example
This command displays the statistics collected at the AAL5 (SAR)
(ATM adaptation layer (segmentation and reassembly)) layer of the
ATM port in the FORMULA 8200. A sample display of
ATM/STATS/
AAL5 is shown below, and parameters are described in Table 2-17.
Table 2-16
ATM/SHOW/TRUNK Parameters
Parameter Description
TRUNK ID The unique trunking entry identifier
TRUNK Description The user-defined description of this trunking entry
PVC/SVC The connection type
VCI Value For PVC connections only, the virtual channel
identifier
ATM Address The ATM address of the other end point of the
connection. Required when SVC is the connection
type