Lec configuration/status information – Allied Telesis AT-8202 User Manual
Page 56
ATM/SHOW Commands
2-28
ATM/SHOW/LEC
This command is a variant of
ATM/SHOW/LEC
, in which the user
enters an optional LEC index. It displays detailed configuration and
status parameters for that particular LEC, as shown below. If an LEC
for that index does not exist, the screen displays the error message,
LEC
. A sample display of
ATM/SHOW/LEC
is shown below, and parameters
.
/ATM/SHOW >
LEC 1
LEC Configuration/Status Information
LEC Number:
1
Description
ELAN Name:
defaultp
LEC ID:
0
Use LEC Config Server:
Yes
LEC Config Server ATM Address:
0x47000580ffe1000000
f215149500204815149501
Protocol State:
Active
Topology Change State:
Clear
Control Direct VCC:
60
Control Distribute VCC:
61
Multicast Send VCC:
62
Multicast Forward VCC:
63
Control Time-out (in seconds):
120
Max. Unknown Frame Count:
1
Max. Unknown Frame Time(in seconds):
1
VCC Time-out(in seconds):
1200
Max. Retry Count:
1
Ageing Time (in seconds):
300
Expected LE-ARP Resp Time (in seconds):
1
Flush Time-out (in seconds):
4