Allied Telesis AT-8202 - Manual (Page 11)

AT-8202 ATM Uplink User’s Guide
1-3
Now that you have configured an ATM port, you need to select a
service for forwarding data traffic for the ATM end-system
environment. This comprises the second part of your ATM network
configuration process.
The FORMULA 8200 switch ATM uplink module supports the
following ATM end-system services:
❑ Classical IP (see page 1-4)
❑ LAN emulation client (LEC) (see page 1-7)
❑ Point-to-point bridging (PTOP) (see page 1-12)
ILMI Poll Enable ILMI variables may be polled using this parameter.
Options: Enable or disable
Default: Enable
Scrambling Enable Bit randomization to increase security
Options: Enable or disable
Default: Enable
Timing Mode Clocking is performed by the FORMULA 8200 (local) or by another switch on
the network (loop).
Options: Local or loop.
Default: local
Table 1-1 ATM Port Configuration Parameters (Continued)
Parameter Description