Allied Telesis AT-8202 - Manual (Page 45)

AT-8202 ATM Uplink User’s Guide
2-17
ATM/CONFIG/DISABLE and ENABLE Commands
Syntax and (alias)
ATM/CONFIG/DISABLE/CIP (cpidis)
ATM/CONFIG/DISABLE/PTOP (ptopdis)
ATM/CONFIG/DISABLE/TRUNK (trunkdis)
ATM/CONFIG/ENABLE/CIP (cipen)
ATM/CONFIG/ENABLE/PTOP (ptopen)
ATM/CONFIG/ENABLE/TRUNK (trunken)
Description
The ATM/CONFIG/DISABLE and ATM/CONFIG/ENABLE
commands allow you to disable and enable services that you have
created (via the
ATM/CONFIG/CREATE command). See the
command examples for a brief description of these services.
ATM/CONFIG/DISABLE/CIP Example
This command disables a currently enabled CIP entity (a member of a
logical IP subnet, or LIS) for the indicated index. The display for
ATM/
CONFIG/DISABLE/CIP is only an update message:
ATM/CONFIG/DISABLE/PTOP Example
This command disables a currently enabled PTOP entry. The display
for
ATM/CONFIG/DISABLE/PTOP is only an
update message:
/ATM/CONFIG/DISABLE > CIP 2
Updating ATM configuration ...
/ATM/CONFIG/DISABLE > PTOP 0
Updating ATM configuration ...