Allied Telesis AT-8202 - Manual (Page 54)

ATM/SHOW Commands
2-26
.
ATM/SHOW/CONNECTION Example
This command is a variant of ATM/SHOW/CONNECTION , and
specifies an optional VCI value. It displays the relevant parameters of
a specific virtual channel connection indicated by the VCI value. If the
indicated VCI connection does not exist, the screen displays the error
message,
Connection entry for VCI does not
exist . A sample display of ATM/SHOW/CONNECTION is
shown below, and parameters are described in Table 2-12.
/ATM/SHOW > CONNECTION
ATM Connection Information
VPI VCI Circuit Type Service Type Status
=================================================
0
3 PVC Oam Active
0 5 PVC Sscop Active
0 16 PVC Ilmi Active
0 32 PVC Pt-Pt Active
0 66 SVC Lec Active
0 67 SVC Lec Active
0 68 SVC Lec Active
0 69 PVC Trunk Active
0 400 PVC Pt-Pt Active
System-provided
connections
User-configured
connections
Table 2-11 ATM/SHOW/CONNECTION Parameters
Parameter Description
VPI Virtual path identifier for this connection (this is
always 0)
VCI Virtual channel identifier for this connection
Circuit Type Circuit type
Options: PVC or SVC
Service Type Application for which this connection carries data
Status Connection status