Allied Telesis AT-8202 - Manual (Page 64)

ATM/STATS Commands
2-36
ATM/STATS/ATM Example
This command displays the statistics collected at the ATM layer of the
ATM port. A sample display of
ATM/STATS/ATM is shown below, and
parameters are described in Table 2-18.
.
ATM/STATS/CIP Example
This command displays the statistics collected at the CIP entity for
the indicated index. If a CIP entity of that index does not exist, the
screen displays the error message,
No such CIP . A sample display
of ATM/STATS/CIP is shown below, and parameters
are described in Table 2-19.
/ATM/STATS > ATM
ATM Layer Statistics
Rx Cells : 3066
Tx Cells : 3066
Dropped Cells : 0
Invalid VCI Cells : 3236
Table 2-18 ATM/STATS/ATM Parameters
Parameter Description
Rx Cells Number of received cells
Tx Cells Number of transmitted cells
Dropped Cells Number of dropped cells
Invalid VCI Cells Number of invalid virtual circuit identifier cells