Allied Telesis AT-8202 - Manual (Page 50)

ATM/SHOW Commands
2-22
.
ATM/SHOW/ARP/LEC Example
This command displays all the entries in the ARP table of the LEC by
. If an LEC entity of that index does not exist, the
screen displays the error message,
LEC does
not exist . A sample display of ATM/SHOW/ARP/LEC
Number> is shown below, and parameters are described in Table 2-8.
.
Table 2-7 ATM/SHOW/ARP/CIP Parameters
Parameter Description
Index A unique identifier for each entry
Range: 1-31
IP Address IP address of the destination
ATM Address The ATM Address at which the destination is accessible
VCI VCI value of the connection over which the destination is accessible
Expiry Time Expiration time of this ARP entry
/ATM/SHOW/ARP > LEC 1
Index State MAC Address ATM Address VCI Expiry Time
===============================================================================================
0
Valid Entry [0 : 20 : 48 : 10 : 14 : 4a] 0x47000580ffe1000000f215149500204810144a00 68 290 seconds
Table 2-8 ATM/SHOW/ARP/LEC Parameters
Parameter Description
Index A unique identifier for each entry
Range: 1-31
State Operation status
MAC Address MAC address of the destination
ATM Address The ATM address at which the destination is accessible
VCI VCI value of the connection over which the destination is accessible
Expiry Time
Expiration time of the ARP entry