Allied Telesis AT-8202 - Manual (Page 69)

AT-8202 ATM Uplink User’s Guide
2-41
ATM/STATS/PTOP Example
This command displays statistics for a PTOP entry. A sample display
of
ATM/STATS/PTOP is shown below, and
parameters are described in Table 2-22.
.
ATM/STATS/SIG Example
This command displays the statistics collected at the SSCOP layer
(service specific connection-oriented protocol). A sample display of
ATM/STATS/SIG
is shown below, and parameters are described in
Table 2-23.
/ATM/STATS > ptop 0
PT-PT 0 Statistics
# Total Packets Tx : 61418
# Total Packets Rx : 0
# Tx Discarded Pkts : 0
# Rx Discarded Pkts : 0
Table 2-22 ATM/STATS/PTOP Parameters
Parameter Description
# Total Packets Tx Number of packets transmitted
# Total Packets Rx Number of packets received
# Tx Discarded Pkts Number of discarded transmit packets
# Rx Discarded Pkts Number of discarded receive packets