Allied Telesis AT-8202 - Manual (Page 19)

AT-8202 ATM Uplink User’s Guide
1-11
5. Enter 1 for VLAN ID 1.
6. Enter 1 for ATM/LEC.
7. Use the ATM/SHOW/LEC command to verify
that the LEC service has been created.
8. Verify that the LEC service is bound by using the PORTSERV/
SHOW/PORTSERV 34 command.
The LEC service has been successfully configured on the switch.
Enter VLAN selection (c to cancel): > 1
Select ATM Service to bind
1) ATM/LEC
2) ATM/PTOP
3) ATM/TRUNK
Enter ATM service selection: > 1
LEC # STATE BIND NAME
===== ================ ================ ==============
1 Inactive-------- Unbound--------- FORELAN1
Enter a LEC selection (c to cancel): .1
Port Service Description (PS for LEC 1) : LEC test
Port service 1 is created for physical port 34
Port service 1 is bound with ATMLEC 1
Updating system/VLAN configuration...
/PORTSERV/SHOW/ > PORTSERV 34
Phyport Phyport Phyport PortServ PortServ Admin Operation VLAN
ID Type Number Type/ID Description Status Status Number
==== ======= ======= ======== =========== ====== ========= ======
34 ATMOC3 1 ATMLEC/1 1 test ENABLE ACTIVE 1
Service type indicator