Allied Telesis AT-8202 - Manual (Page 67)

AT-8202 ATM Uplink User’s Guide
2-39
ATM/STATS/LEC Example
This command displays the statistics collected at the LEC for the
indicated index. Note the valid values for the LEC index are 0 through
31. If an LEC entity of that index does not exist, the screen displays
the error message,
LEC does not exist . A
sample display of ATM/STATS/LEC is shown below,
and parameters are described in Table 2-21.
Table 2-20 ATM/STATS/CONNECTION Parameters
Parameter Description
VPI/VCI Virtual path identifier/virtual connection identifier.
Rx Octet Number of received octets
Tx Octet Number of transmitted octets
Rx Cell Number of received cells
Tx Cell Number of transmitted cells
Rx SDU Number of received service data units
Rx SDU Discards Number of received service data unit discards
Rx Errors Number of receive errors
Tx SDU Number of transmitted service data units
Tx SDU Discards Number of transmitted service data unit discards
Tx Errors Number of transmit errors
SAR Timeouts Number of segmentation and reassembly timeouts
CRC Errors Number of cyclic redundancy check errors
Oversized SDUs Number of oversized service data units