Allied Telesis AT-8202 - Manual (Page 57)

AT-8202 ATM Uplink User’s Guide
2-29
Table 2-13 ATM/SHOW/LEC Parameters
Parameter Description
LEC Number The index number for this LEC
Description A user-defined description for this LEC (optional)
ELAN Name The ELAN to which this LEC belongs
LEC ID The user-defined unique ID number for this LEC
Use LEC Config Server The configuration mode for this LEC
LEC Config Server ATM Address The ATM address of the server used by this LEC, if the configuration
mode is Yes
Protocol State Operational state of the LEC
Options:
- Active
- Inactive
- Sent connect request for control direct VCC
- Sent connect response for control direct VCC
- Sent connect request for multicast send VCC
- Sent connect req and resp for mcast send VCC and fwd VCC
- Received connect confirm for multicast forward VCC
- Waiting for multicast forward connect ind
- Sent connect response for multicast forward VCC
- Sent ARP request for BUS
- Sent configuration request
- Sent join request
- Sent connect request for cfg direct
- VCC unknown
Topology Change State Change in topology state
Control Direct VCC VCI value of the control direct VC to LES
Control Distribute VCC VCI value of the control distribute VC from LE server.
Multicast Send VCC VCI value of the multicast send VC to BUS
Multicast Forward VCC VCI value of the multicast forward VC from BUS
Control Time-out Join request timeout
Range: 10 – 300 seconds
Max. Unknown Frame Count Maximum unknown frame count
Range: 1 – 10
Default: 1
Max. Unknown Frame Time Range: 1 – 60 seconds
Default: 1 second
VCC Time-out VCC entry aging timer
Default: 1200 seconds
Max. Retry Count Maximum retries for LE ARP entry
Range: 0 – 2