Allied Telesis AT-8202 - Manual (Page 58)

ATM/SHOW Commands
2-30
ATM/SHOW/PORT Example
This command displays all relevant configuration and default
settings of the ATM port (network interface card) and the configured
parameters associated with the ATM signaling stack in the
FORMULA 8200. A sample display of
ATM/SHOW/PORT is shown
below, and parameters are described in Table 2-14.
Ageing Time LE ARP entry aging
Range: 10 – 300 seconds
Expected LE-ARP Resp Time Expected LE ARP response time
Range: 1 – 30 seconds
Flush Time-out Flush request timeout
Range: 1 – 4 seconds
Table 2-13 ATM/SHOW/LEC Parameters (Continued)
Parameter Description