beautypg.com

Table1-2 cip configuration parameters, Enter 2 at the prompt to enable the ip address, Enter the ip address – Allied Telesis AT-8202 User Manual

Page 14: Enter the subnet mask, Enter the connection type (pvc or svc), Define the vci value if your step6 entry is pv, Keep the default value for mtu size, Set the rip mode, Enter 0 to save the configuration

Table1-2 cip configuration parameters, Enter 2 at the prompt to enable the ip address, Enter the ip address | Enter the subnet mask, Enter the connection type (pvc or svc), Define the vci value if your step6 entry is pv, Keep the default value for mtu size, Set the rip mode, Enter 0 to save the configuration | Allied Telesis AT-8202 User Manual | Page 14 / 80 Table1-2 cip configuration parameters, Enter 2 at the prompt to enable the ip address, Enter the ip address | Enter the subnet mask, Enter the connection type (pvc or svc), Define the vci value if your step6 entry is pv, Keep the default value for mtu size, Set the rip mode, Enter 0 to save the configuration | Allied Telesis AT-8202 User Manual | Page 14 / 80