Samsung SCH-R530RWBMTR - Manual (Page 142)

136
• Password: If you choose a security level that uses a password,
enter the password. By default, the password is your mobile
telephone number.
• Show password: Enable to make the Password field visible.
• Show advanced options: Enable to access advanced options,
including Broadcast channel, to specify the channel your phone
uses for the mobile hotspot.
Allowed Device List
Control whether devices connect to your mobile hotspot with
the Allowed device list. After you add devices to the list, they
can scan for your phone and connect using your phone’s
mobile hotspot name (SSID) and password.
Note: Using your phone as a mobile hotspot consumes battery
power and uses data service. While the mobile hotspot
is active, your phone’s applications will use your
Wireless Provider’s data service. Roaming while using
your phone as a mobile hotspot will incur extra data
charges.
1. From the Settings screen, under Wireless and network,
touch More settings ➔ Tethering and Mobile HotSpot ➔
4G Mobile HotSpot. The 4G Mobile HotSpot screen
displays.
2. Touch Allowed device ➔ , then enter the other
device’s Device name and MAC address.
3. Touch OK to add the device to the Allowed devices list.
Tip: For information about connecting to your moble Wi-Fi
hotspot, see “Connecting a Device via Mobile Wi-Fi
HotSpot” on page 123.
NFC
Use NFC (Near Field Communication) to share information
between your phone and another NFC device by touching the
devices together, typically back-to-back.
For more information about sharing information with NFC,
see “Android Beam” on page 137 and “S Beam” on page
137.
1. From the Settings screen, under Wireless and network,
touch More settings.
++