Horner APG XL6 OCS - Manual (Page 72)

CH.12 MAN0883-04-EN
March 4, 2010 Page 72 of 135 #1037
Enable AutoRun
No = OCS will be in IDLE mode after AutoLoad or Automatic Restore.
Yes = OCS will be automatically placed into RUN mode after AutoLoad or
Automatic Restore.
“Enable AutoLoad” displays the following options which can be selected:
Enable AutoLoad
No = Does not load AUTOLOAD.PGM automatically when application
program is absent or corrupted.
Yes = Loads AUTOLOAD.PGM file automatically from RM when application
program is absent or corrupted.
Clone Unit
‘Clone Unit’ feature allows the user to “clone” the OCS of the exact same model. This feature “clones”
application program and unit settings stored in Battery backed RAM of an OCS into the RM (refer
Removable Media
Chapter 9 for details on using RM). It can then be used to clone a different OCS (exact
same model).
This feature can be used for:
• Replacing an OCS by another unit of the same model.
• Duplicating or “clone” units without a PC.