Horner APG XL6 OCS - Manual (Page 19)

MAN0883-05-EN CH.3
March 4, 2010 Page 19 of 135 #1037
3.4 Panel
Cut-Out
For installations requiring NEMA4X liquid and dust protection the panel cutout should be cut with a
tolerance of ± 0.005” (0.1 mm).
Figure 3.4 – Panel Cutout Tolerances
3.5 XL6/XL6M/XL6e
Dimensions
Figure 3.5 – XL6/XL6e OCS Dimensions
6.875”
[175mm]
[131mm]
001OCS003-R1
5.156”
R .125” [3 mm] TYP.
RADIUS CORNERS
WHEN REQUIRING
DUST OR WATER
TIGHT SEAL PER
NEMA 4, 4X OR 12