Horner APG XL7 OCS - Manual (Page 96)

XL7 User Manual
CHAPTER 17: CLONE UNIT
17.1 Overview
‘Clone Unit’ feature allows the user to “clone” the OCS of the exact same model. This feature “clones”
application program and unit settings stored in Battery backed RAM of an OCS into the RM (refer
Removable Media, Chapter 9, for details in using RM). It can then be used to clone a different OCS (exact
same model).
This feature can be used for:
-
Replacing an OCS by another unit of the same model.
-
Duplicating or “clone” units without a PC.
17.2 Clone
User needs to perform the following to Clone:
1. The ‘Clone Unit’ can be accessed by going to the ‘System Menu’ of the OCS. A new menu “Clone
Unit” has been added at the end of the main system menu as shown below:
Figure 17.1 – System Menu
2. Selecting “Clone Unit” menu will open the following menu screen:
Figure 17.2 – Clone Unit Menu before Cloning
Page 96 of 110