Horner APG XL7 OCS - Manual (Page 15)

XL7 User Manual
-
On board Ethernet port (10/100Mbps) for Cscape programming and application defined
communication, with Auto MDI/MDI-X.
2.4 Required and Suggested Accessories
The following list contains a sampling of required and suggested XL7 OCS accessories. Visit the Horner
websites to view updates on new products and accessories.
Table 2.1 – XL7 OCS Accessories
Part Number Description
HE-MC1 Removable Media card - compatible with XL7 OCS. Card capacity is 2GB or larger.
HE-MR1
Media Card Reader for HE-MC1. Portable device allows HE-MC1 to be plugged
into the USB port of personal computers as a portable hard drive.
HE-X24-AS
Power supply 100-240VAC or 140-340VDC Switching supply that outputs 1.5 A / 3 A
(HE-X24-AS/AL) at 24 VDC. Mounts on Standard DIN rail. Designed for X Family products.
HE-X24-AL
Power supply 100-240 VAC or 140-340 VDC Switching supply that outputs 1.5 A / 3 A
(HE-X24-AS/AL) at 24VDC. Mounts on Standard DIN rail. Designed for X Family products.
HECSP Cscape Software Package on a reusable USB flash drive with symbol library.
HE-XCK Programming cables for all X products including a USB to serial adapter in a travel case.
HE-CPK
Cscape on a reusable USB flash drive.
Programming cables for all X products including a USB to serial adapter in a travel case.
2.5 Useful Documents and References
The following information serves as a general listing of Horner controller products and other references
of interest with their corresponding manual numbers. Visit the Horner websites to obtain user
documentation and updates.
Table 2.2 – OCS Reference Document numbers
NOTE: This list is not intended for users to determine which products are appropriate for their application;
controller products differ in the features that they support. If assistance is required, refer to Technical Support.
Manual Description Manual Number
User Manual for XLe/XLt OCS models MAN0878
User Manual for XL6/XL6e OCS models MAN0883
User Manual for XL4 OCS models MAN0964
User Manual for QX Series models MAN0798
User Manual for NX Series models MAN0781
Other Useful References Manual Number
Supplement for SmartStack Ethernet Modules SUP0740
CAN Networks MAN0799
Spark Quenchers for Arc and Noise Suppression (output protection) MAN0962
Wiring Accessories and Spare Parts Manual MAN0347
NOTE: The XL7 OCS is not shipped with a programming cable in the box. To obtain a
programming cable, order HE500CBL300.
Page 15 of 110