Safety precautions – Triton TritonMap User Manual
Page 4
Safety Precautions
Please adhere to the hardware and software precautions
mentioned below. In addition, observe all safety precautions
mentioned in this manual.
When working with the overall system
1. Before handling components inside your computer system, exit
all applications and shut down the operating system in
accordance with procedures applicable to them.
2. Turn off the power to the computer and disconnect all cables that
may be feeding electrical power to the system you will be
working on.
3. Wear a grounded, anti-static wrist-strap. This is especially
important if you are removing, replacing, or installing a printed
circuit board of any kind.
Failure to adhere to these and other safety precautions mentioned in the
manual could result in harm to property or personnel!
When working with magneto-optical cartridge disks
• Please refer to the Appendix entitled “Mass Storage Options” for
important details covering the handling of M-O disks!
• Never boot your system with a writable M-O cartridge inserted
into the drive!
• Use magneto-optical media that has 512 bytes per sector, not
1024 bytes per sector, and use the AFDisk software utility to
format magneto-optical media. Never use Windows 95 to
format M-O media!
Triton Elics Internatonal
125 Westridge Drive
Watsonville, CA 95076
USA
(831) 722-7373