Triton TritonMap - Manual (Page 16)

June 2004 DelphMap™ User's Manual
TEI software is compatible with Windows NT 4.0, Windows 2000, and Windows
XP. The following notes will help you achieve a smooth installation of the
software.
• Please exit from all other applications before running any of the
installation programs.
• You will not be able to complete the installation on an NT4.0 or
Windows 2000 system if you do not have administrator’s rights. All Isis
“black boxes” ship with a user name Isis. In this case the Isis user
name has administrator’s rights and does not require a password.
• Each application is installed by browsing to the appropriate folder (for
example, Isis5.50 Install) on the CD and double-clicking on the
SETUP.EXE file found in that folder.
• TEI recommends that if you have more than one hard drive, you install
the software on the second (usually the D:) drive, using the default
folder names on the CD. You will be given the option to select any drive
during the setup process, select the Custom option and change the
drive letter.
• The first installation on an NT4.0 system requires a re-boot during the
installation; however, this only occurs for the first installation. Under
Windows 2000, no rebooting is necessary during the installation
process. However, you must reboot the system after installing under
Windows NT 4.0.
• For each application, a number of sample data files can be optionally
installed. These files will reside in a subfolder called Demo Files within
each application’s main folder. These special files can be played back
or processed by the relevant TEI applications without a TEI sentinel
being installed. If no sentinel (dongle) is attached, a message displays,
indicating either that a sentinel was not found or that the sentinel is
damaged. However, you can still play back the sample files that come
from the CD.
• In order to run the software in acquisition mode, or to play back or
process other files, you will need a TEI sentinel attached to the LPT1
printer port. Contact TEI if you need a sentinel.
• If the operating system is Windows NT 4.0 or Windows 2000, you will
need to install a sentinel driver. The driver is included on the CD in the
Sentinel folder; a text file, with installation instructions, is in that folder.
• In the case of Windows NT 4.0, Service Pack 5 (or higher) needs to be
installed. Service Pack 5 is on the CD.
Chapter 1: Getting Started with DelphMap 2