Vaisala PTU300 - Manual (Page 98)

User's Guide _______________________________________________________________________
96 ___________________________________________________________________ M210796EN-G
Command Description
AERR Change the analog error output values
AOVER [ON/OFF] Extend analog output range by 10%
Table 26 Setting and Testing the Relays
Command Description
RSEL Set and view the relays
RTEST Test the relays
Table 27 Pressure Commands
Command Description
PRES [hPa] Set the value for pressure compensations
XPRES [hPa] Set the value for pressure compensations,
temporarily
PFIX Select pressure compensation using either a
fixed value or using measured value
AVRG Set pressure average period
HHCP Set height offset for HCP calculation
HQNH Set height offset for QNH calculation
HQFE Set height offset for QFE calculation
PSTAB Set the pressure stability indicator
PDMAX Set the pressure difference limit
Table 28 GPS Commands
Command Description
*0100P9 Data output query
*0200P9 Data output query
*9900P9 Data output query
*9900SN Serial number query
Table 29 Other Commands
Command Description
? Output information about the device
?? Output information about the device in POLL
mode
ALSEL Set display alarms
CON Set display contrast
ECHO [ON/OFF] Turn the serial interface echo ON/OFF
ERRS List present transmitter errors
FILT Set the result filtering
FIND All devices in POLL mode send their
addresses
HELP List the currently available commands
LIGHT Set the display backlight mode
LOCK Lock the menu or disable the keypad
MODBUS View Modbus diagnostic counters
MODS View information about connected modules
RHLIMIT [ON/OFF] Limit highest value of RH output to 100%
VERS Display the software version information
XHEAT Sensor heating