Maintenance, Periodic maintenance, Cleaning – Vaisala PTU300 User Manual
Page 157: Changing the probe filter, Chapter 6, Chapter 6, maintenance
Chapter 6 _______________________________________________________________ Maintenance
VAISALA _______________________________________________________________________ 155
CHAPTER 6
MAINTENANCE
This chapter contains information that is needed in basic maintenance of
the product
Periodic Maintenance
Cleaning
Clean the transmitter enclosure with a soft, lint-free cloth moistened with
mild detergent.
Changing the Probe Filter
1.
Turn the filter counter-clockwise to loosen it.
2.
Remove the filter from the probe. Be careful not to touch the sensor
with the filter. Without the filter in place, the sensor is easily
damaged – handle the probe carefully.
3.
Install a new filter on the probe. When using the stainless steel
filter, take care to tighten the filter properly (recommended force
5 Nm).
New filters can be ordered from Vaisala, see section Spare Parts and
Accessories on page 189.