Ag Leader PF3000Pro Cotton Yield Monitor Operators Manual - Manual (Page 80)

PF3000 Pro Cotton Yield Monitor
Fields and Loads Ag Leader Technology
July 2003 4-2
Recommendations All the information recorded by the PF3000 Pro Cotton Yield Monitor must
be recorded in a field and load. The field and load that the monitor is set on
is found on the top line of the main operating screen.
Fields
You should at least create all the fields and name them before you begin to
use the PF3000 Pro Cotton Yield Monitor. You can create and name your
fields using any operating mode. You should choose field names that you
can use year after year. If you have multiple cotton monitors harvesting in
the same field, setup the same field names with the same field number. This
will simplify merging yield data into one map from multiple machines.
Loads
You can also create and name loads within fields before you use the PF3000
Pro Cotton Yield Monitor. New loads can be created on-the-fly. Load
numbers do not have to match between monitors of multiple machines in the
field.
Definition:
Load: A load is used to subdivide a field into smaller sections. The
monitor load is not associated with the picker basket, wagon, or truck load.
Load
Field